JEM 777 BODY - DRAWING STUDY

Body-only model based on the supplied photographed drawing, not a complete guitar.
Units: meters internally, displayed as millimeters. +Z is the front.
Width calibration: drawing 156.6 + 154 = 310.6 mm.
Body blank thickness: 45 mm assumed from the sections, not confidently dimensioned.
Outline and grip traced by eye; perspective in the paper photograph is not rectified.
Neck pocket nominal 55.4mm wide, modeled56.5mm to clear traced open edges;
nominal19.4mm depth. Pickup routes approximately18mm,
mounting ear reliefs 30mm, bridge recess6mm, back spring16mm and electronics30mm.
The rear belly contour, cover shapes and minor route junctions are approximations.
No neck, hardware, pickups, strings, pickguard or screws are modeled.
Do not machine or order replacement parts from this model without measuring
an original body and checking every feature against an undistorted drawing.

EDITING
Body object retains named, non-destructive Boolean cutters in collection02.
Unhide any cutter with Alt-H in the viewport or via the Outliner.
Move/scale a cutter to edit a cavity. Its rendering stays disabled.
Original blueprint is packed into the .blend under collection04.
GLB and STL exports are evaluated body geometry only.
STL coordinates are millimeters; GLB uses meters.
